[su_column]

IAP’s L-1000 Procoater

is currently the fastest Liquid Portable Seed Treater available today. The treater is easy to clean, can be operated by a single person, and is designed to allow the operator to treat comfortably with consistency and speed.
Rate:
25 to 30 Mt per hour, all grain type
Dimensions:
Auger – 6″ x 30′ of Poly Flighting.
Trailer – Length 15′, Height 11.5′

Components:

Programmable Logic Controller (PLC):
The PLC system on the Procoater L-1000 provides the operator to apply with confidence. It contains electronic components within the electrical panel, to run fixed and variable motors. After calibration, the PLC system regulates the speed and flow of the pumps and motors, that is what makes the Procoater the most accurate Seed Treater available today.

The operator is able to use the touch screen to set the rates of application, make over 30 different recipes, and set the program so it is as easy as pressing “System Start”.

With variable motors, the operator is able to speed up/slow down the machine, change rates, all on the go.

Surge Bin:

Holds 75 Bu. This allows the Rotary Seed Gate to run a constant flow. This includes high and low shut off sensors which are connected to the PLC.
[/su_column]

Rotary Seed Gate:

Early Calibration through the PLC allows the operator to know the amount of Kg’s of seed distributed throughout the Treater. The Rotary Gate allows constant flow for quicker application.

Application Chamber:

Once the Seed has passed through the Rotary Seed Gate, it is gravity feed through the Application Chamber. In the Center of the Application Chamber is a shaft driven spinning disk, which atomizes the liquid treatment. The Spinning Disk is used to apply the liquid/slurry that was previously made in the Handler Tank. This provides early application before being fully mixed throughout the Auger after.

Handler Tank:

The operator is able to mix a slurry of seed treatments and circulate it to get the proper mix.

Peristaltic Pump:

With a Peristaltic Pump, an operator can run the machine as quick or as slow as they desire. This pump, pumps and primes at the same time. Which avoids damage to the pump, and a more accurate reading.